All Categories
×

Get in touch

Replace car starter

The car starters are the like heart of your vehicle. That stuff that makes the engine in your car go vroom so you can get to work. But what happens when the starter fails? Obviously, if a starter motor for car fails and you are at the same place then it is no more than frustrating. But don’t worry! A car starter is one of those things that has a couple of tools and directions you can count on to be able swap it in yourself. It may not be a simple task, yet on the other hand it is also something much less complicated than you think. Now, we will begin with this guide

Disconnect the battery. At the outset, Haochi car starter make sure to put your car into “park” and turn it off. And of course, do not forget to put the parking brake so I would not go back. Now you have to find the battery and properly can go ahead or unplug it. Note: However, this is one of the most important things to buy because it will improve your safety while you work on the car more than anything else.

DIY car starter replacement made easy

Unbolt the starter. Locate the starter motor once you find it, then locate the bolts that hold it. The starter is usually secure with two or three bolts. These bolts are held with either a wrench or socket set and will have to be loosened until they can come off. Make sure to keep the bolts in a spot where they will not go missing

Disconnect the wires. After you get all of your bolts out, the next step will be to unplug the wires that go into your starter. Normally, Haochi starter motor on car 1 thicker cable which is the positive one and a lesser than it. Label each of these wires with either tape or writing on how/where they go so you would be able to figure it out for time when circuit assembly is necessary one more time.

Why choose Haochi Replace car starter?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Get in touch